V2 features a new mounting solution for GR Yaris and Lexus LBX Morizo RR with OEM or compatible aftermarket lower control arms (LCA). Maximum aftermarket arm thickness: 25 mm. Arm shape and mounting clearance must also be checked.
The GR Yaris Brake system is a very competent one from factory, but tracking the car frequently can test even the best of road car systems, and this is no exception.
While temperatures do get hot with the standard OEM brake pads, things start getting out of hand when you install aftermarket, high friction brake pads. This translates in many issues, among which caliper paint fading and rubber dust boots melting, that can be catastrophic...
Given that the wheel well’s packaging is very tight, installation of tubes funnelling the air from the front bumper’s cooling intakes isn’t a solution, as there is too much pressure drop.
We set out to design a simple and efficient system of air deflectors, that intercept the air flowing underbody (just like on Porsche GT3 RS and many other supercars), and directs it directly to the center of each front brake disc. This setup allows for a cleaner installation, no clutter in the wheel wells and is maintenance free.
The application results in massively reduced brake temperatures, and you will be able to continue pushing with confidence, session after session.
KIT CONTENTS:
- 2x Brake Cooling Deflectors
- 1x Installation hardware kit
- Installation Instructions
INSTALLATION NOTES: the installation of this kit doesn’t require any cutting or machining. FITS ONLY 18 inch wheels (17 inch wheels will result in interferance).
INSTALLATION DIFFICULTY: simple, requires a car jack and basic tools.
TECHNICAL SPECIFICATION TABLE |
|
Feature |
Specification |
Material |
HP-FDM 3D Printed PA12 |
Compatibility |
OEM Toyota GR Yaris (Gen 1 & Gen 2) OEM Lexus LBX Morizo RR Wiborg Engineering Circuit Geometry kit Verkline front LCA Arms Aftermarket lower control arms (LCA): maximum arm thickness 25 mm. |
Installation |
Direct bolt-on (installation manual download) |
Disc Cooling Performance |
Up to 25% reduced disc temperature |
Frequently asked questions
How does the kit improve brake cooling?
The deflectors direct underbody airflow into the centre of the front brake discs, reducing disc temperature by up to 25%.
Does V2 fit aftermarket lower control arms?
V2 supports OEM and compatible aftermarket lower control arms (LCA) on the GR Yaris and Lexus LBX Morizo RR. Maximum aftermarket arm thickness is 25 mm. Check arm shape and mounting clearance as well.
Which wheel size can I use?
This kit specifies 18-inch wheels only. The product instructions warn that 17-inch wheels cause interference.
What is included, and how does it mount?
Two brake-cooling deflectors, installation hardware and instructions. Fitting requires basic tools and safe vehicle lifting, without cutting or machining.
V2 features a new mounting solution for GR Yaris and Lexus LBX Morizo RR with OEM or compatible aftermarket lower control arms (LCA). Maximum aftermarket arm thickness: 25 mm. Arm shape and mounting clearance must also be checked.
The GR Yaris Brake system is a very competent one from factory, but tracking the car frequently can test even the best of road car systems, and this is no exception.
While temperatures do get hot with the standard OEM brake pads, things start getting out of hand when you install aftermarket, high friction brake pads. This translates in many issues, among which caliper paint fading and rubber dust boots melting, that can be catastrophic...
Given that the wheel well’s packaging is very tight, installation of tubes funnelling the air from the front bumper’s cooling intakes isn’t a solution, as there is too much pressure drop.
We set out to design a simple and efficient system of air deflectors, that intercept the air flowing underbody (just like on Porsche GT3 RS and many other supercars), and directs it directly to the center of each front brake disc. This setup allows for a cleaner installation, no clutter in the wheel wells and is maintenance free.
The application results in massively reduced brake temperatures, and you will be able to continue pushing with confidence, session after session.
KIT CONTENTS:
- 2x Brake Cooling Deflectors
- 1x Installation hardware kit
- Installation Instructions
INSTALLATION NOTES: the installation of this kit doesn’t require any cutting or machining. FITS ONLY 18 inch wheels (17 inch wheels will result in interferance).
INSTALLATION DIFFICULTY: simple, requires a car jack and basic tools.
TECHNICAL SPECIFICATION TABLE |
|
Feature |
Specification |
Material |
HP-FDM 3D Printed PA12 |
Compatibility |
OEM Toyota GR Yaris (Gen 1 & Gen 2) OEM Lexus LBX Morizo RR Wiborg Engineering Circuit Geometry kit Verkline front LCA Arms Aftermarket lower control arms (LCA): maximum arm thickness 25 mm. |
Installation |
Direct bolt-on (installation manual download) |
Disc Cooling Performance |
Up to 25% reduced disc temperature |
Frequently asked questions
How does the kit improve brake cooling?
The deflectors direct underbody airflow into the centre of the front brake discs, reducing disc temperature by up to 25%.
Does V2 fit aftermarket lower control arms?
V2 supports OEM and compatible aftermarket lower control arms (LCA) on the GR Yaris and Lexus LBX Morizo RR. Maximum aftermarket arm thickness is 25 mm. Check arm shape and mounting clearance as well.
Which wheel size can I use?
This kit specifies 18-inch wheels only. The product instructions warn that 17-inch wheels cause interference.
What is included, and how does it mount?
Two brake-cooling deflectors, installation hardware and instructions. Fitting requires basic tools and safe vehicle lifting, without cutting or machining.
Contact us
Customer Service +
We value each and every Customer that trusts us with her or his orders: this is why we reply to your questions or service requests with lightning-fast speed, and always help you with the best solution possible, including technical advice on products, settings and setups. Just Contact Us and see for Yourself!